Matching Ambient cable for the Sound Devices 970: LTC-OUT (port on the audio recorder: BNC). For Sync (Genlock/Wordclock): SYNC-OUT (port on the audio recorder: BNC).
Also applies to: Sound Devices PIX 260i, Sound Devices PIX 270i
Port on the Ambient Lockit box5-pin port (Lemo-compatible)
Port on the audio recorderBNCTimecode Cable PushPull-5-pin (Lemo-compatible) to BNC
View in shopRight-angled (BNC 90°). The clock position is the direction of the cable exit, seen from behind the plugged-in connector, red dot at the top.
Port on the Ambient Lockit box5-pin port (Lemo-compatible)Port on the audio recorderBNCSync Cable PushPull-5-pin (Lemo-compatible) to BNC
Only needed if you use sync. Requires a Lockit (ACN-CL), LockitBT (ACN-LB) or Lockit+.
View in shopIn TX Mode your sound recorder, studio clock or DAW interface is the master: your Lockit box takes over its timecode and works as a bridge. This requires your device to output timecode on this port. Check its manual. How TX Mode works
Port on the audio recorderBNCPort on the Ambient Lockit box5-pin port (Lemo-compatible)Timecode Cable BNC to PushPull-5-pin (Lemo-compatible)
View in shopRight-angled (BNC 90°). The clock position is the direction of the cable exit, seen from behind the plugged-in connector, red dot at the top.
| Cable | Lockit | LockitBT | Lockit+ | NanoLockit |
|---|---|---|---|---|
| LTC-OUT | ACN port Red sleeve | TC/DATA port Red sleeve | ACN port, front left (blue marking) Red sleeve | 5-pin port on top Red sleeve |
| SYNC-OUT | SYNC port Yellow sleeve | TC/SYNC port Yellow sleeve | SYNC port, front right (yellow marking) Yellow sleeve | – |
| LTC-IN (TX Mode) | ACN port Green sleeve | TC/DATA port Green sleeve | ACN port, front left (blue marking) Green sleeve | 5-pin port on top Green sleeve |
